Blue POM Coated Oil Grease Lubricated Polymer Bearings

Find a huge selection of Blue POM Coated Oil Grease Lubricated Polymer Bearings from China at Top Bearings.

Product Parameter

Material:	Low-Carbon Steel + Porous Bronze + Yellow POM Strips	Bush Types:	Washer,Plate,Good Sliding Bearing Bush
Samples:	Charged Or Free Samples, Free Of Standard Size Slide Bushing, Small Order Acceptable, Apply To Seller, Charged Of Non-standard	Area Of Use:	POM Bushes Are Suitable For Rotational And Oscillating Movements
High Light:	Metal Polymer Plain Bearings, Grease Lubricated Polymer Plain Bearings, POM Coated Self Lubricating Bearings

Metal-Polymer Plain Bearings Oil/Grease Lubricated Bushing With Blue POM Coated Self Lubricating Bearing
 
Metal-Polymer Composite Plain Bearings| VIIPLUS Self-lubricating Bearings
Metal-polymer composite plain bearings are bearings for very small radial or axial pouches. They work with little noise and are particularly suitable where high loads must be supported in combination with a relatively slow rotation and rotation movement. These products are available as bushings, flanged bushings and thrust washers in two groups of materials.
 

 

FEATURES

·Low friction.
·Damage prevention to shaft.
·Virtually wear-free bearing surface with minimal lubricant.
·Low friction for smooth rotation at startup and at low speed under high load conditions.
·Seizure-free sliding surfaces.
·Excellent shaft misalignment tolerance.
·Ability to withstand impact loads.
·Excellent load-carrying performance even under oscillating and fretting conditions.
 
CHARACTERISTICS
STRUCTURE AND COMPOSITION
Steel Back + Porous Bronze Sinter +
POM with Lubrication Indents
 
2. Porous bronze layer; The layer provides self-lubricating strength. Layer.
3. Steel support The layer provides load and thermal conductivity
4. Copper / tin layer.
 
PROPERTIES

Max. load (Dyn/stat), N/mm2	140 / 250
Max. sliding speed m/s	2.5
Max. PV value N/mm2 x m/s	2.8
Temperature range, oC	-400 / +130
Shaft tolerance	f7 - h8
Housing tolerance	H7
Shaft roughness Ra	≤ 0.4
Shaft hardness	> 200 HB

 
ADVANTAGES
·High sliding velocity
·High load capacity
·Low friction coefficient
·Minimal bearing play
 
OPERATING PERFORMANCE

Dry	Poor
Oil lubricated	Good
Grease lubricated	Very Good
Water lubricated	Poor
Process fluid lubricated	Poor

 
APPLICATION

 
·Elevators
·Transport
·Mechanical engineering
·Construction machinery
 
AVAILABILITY
·Thrust washers
·Sliding plates